ROCKERARMS-VALVES-CAMS-SPRINGS-PUSHRODS-ROCKER STANDS
HIGH RATIO (1.54:1) ROCKER ASSEMBLIES. ALL NEW PARTS 450.00 PAIR
NOW INCLUDE BILLET ROCKER STANDS
BILLET ALUMINUM ROCKER STANDS FOR Y-BLOCK 89.00 set of 8
STANDARD HEIGHT, or INSTALL INVERTED FOR +.050"
Grade 8 rocker bolts with washers, 12 bolts, 16 washers, 4 nuts .... 15.00
STAINLESS VALVES:
1.600" X 5.060" overall length exhaust
1.625" X 5.060" o.a.l. exhaust
1.940" X 5.060" o.a.l. intake
2.020" X 5.060" o.a.l. intake
ANY SET OF 8 8 VALVES 95.00
ANY SET OF 16 16 VALVES 185.00
High Quality Stainless Steel STOCK DIMENSION valves
1.927" 1.51" X 5.090" 1957-59 heads (Set of 16) 189.00
1.78" X 1.51" X 5.090 1954 256 cu in and 1955-56 heads (Set of 16) 189.00
Over-size stainless valves for C0AE-C0TE-C1AE-C1TE heads 1.84"X1.51" (set of 16) 175.00
CAMS AND VALVE SPRINGS
PERFORMANCE CAMS: ground on NEW cores
NOTE: All new cam cores for Y-Blocks are manufactured with insufficient oil groove in center journal resulting in reduced oil flow to rocker arms.
WE CORRECT THIS PROBLEM ON ALL NEW CAMS WE SELL!!!
SAVE THRUST SPACER FROM OLD CAM BEFORE DISCARDING.
IF YOU THREW IT AWAY: NEW THRUST SPACER .195" THICK $15.00
256 272 292 312 CAMS: NO LARGE JOURNAL OR CROSS DRILLED CORES
GRIND RPM range Idle quality Duration @.050" Lift Lobe separation Springs Transmission
Y-265S 1800-5500 Good 265º 224º .435" 110º VS95-16 Works well with Ford-o-matic or exhaust manifolds Great mild street cam.
Y-270S 2000-5800 Slight lope 272º 224º .440" 108º VS95-16 or VS105-16 Ford-o-matic okay. Use with headers.
Y-284S 2500-6200 Lopey 284º 236º .460" 108º VS105-16 or VS115-16 Manual or hi stall. Ford-o-matic not recommended. Cruise Night Special
***** WE'VE ADDED 2 NEW CAM DESIGNS *****
Y-280-I-07 2200-6000 Mild lope 280º 228º .500" 107º VS115-16 .500 Lift with stock rockers
Headers recommended. Manual or stall converter.
Y-280-I-11 2400-6200 280º 228º .500" 111º VS115-16 .500 Lift with stock rockers
Ford-o-matic not recommended. 14" manifold vacuum @ 700 RPM idle.
Y-292S 2800-6500 Rough 292º 240º .485" 108º 115# seat minimum Manual or hi stall. Street racer, T-Bucket, good track grind.
NEW CAMS: 189.00 outright.
NEW CAM AND LIFTERS. Set of 16 NO CHINESE PARTS!! 355.00
Lifters for new cams. Set of 16 Outright, no cam purchase 209.00
NOTE: CAMS WITH MORE THAN .450" LIFT REQUIRE CUTTING VALVE GUIDES FOR ADDITIONAL RETAINER TO SEAL CLEARANCE. OVER .500" MUST CHECK PISTON TO VALVE CLEARANCE.
VALVE SPRINGS: all springs listed fit chromoly retainers listed below.
SPRINGS SOLD IN SETS OF 16.
Spring # Type Seat pressure @ installed ht. open pressure @ lift max lift Price
VS95-16 Single w/damper 95# @ 1.775" 240# @ .450" .450" 65.00
VS105-16 Single w/damper 105# @ 1.825" 235# @ .500" .500" 65.00
VS115-16 Single w/damper 115# @ 1.825" 270# @ .500" .525" 85.00
CHROMOLY RETAINERS: 7º, 11/32" stem, 1.060"I.D. spring 1.375" O.D.
11/32" standard installed height (set of 16) 65.00
HARDENED AND MACHINED KEEPERS: 7º, fit stock and chromoly retainers
Hardened and machined 11/32" valve keepers. standard height only 35.00
Hardened stamped keepers. Standard height and +.050" (set of 32) 12.00
PUSH RODS:
PR-1223 5/16" tubular replacement 1956-1959 heads set of 16 65.00
PR-1221 5/16" tubular replacement 1954, 1955 heads set of 16 65.00
PR-1221 5/16" tubular replacement 1960-64 heads set of 16 65.00
PR-1221 5/16" tubular replacement ALUMINUM HEADS set of 16 65.00
5/16" Chromoly specify custom length set of 16 135.00